Menon Bearings consolidated PAT surges 117% YoY to ₹14.74 Cr as margins expand
PAT +117.13% YoY · revenue +57.29% · margins expanding
₹98.33 Cr
+57.29% YoY
₹14.74 Cr
+117.13% YoY
14.45%
+4pp YoY
₹2.63
Menon Bearings' consolidated Q2 FY27 (quarter ended September 2026) results show revenue from operations up 57.3% YoY to ₹98.33 Cr (from ₹62.51 Cr in Q2 FY26) and consolidated PAT up 117.1% YoY to ₹14.74 Cr (from ₹6.79 Cr), with basic EPS at ₹2.63 against ₹1.21 a year ago. Sequentially, growth moderated — revenue rose 7.1% and PAT 4.5% over Q1 FY27's ₹91.79 Cr revenue and ₹14.11 Cr PAT — a normal slowdown after a strong first quarter rather than underlying weakness, since the YoY trend, the primary read, remains sharply positive. There were no exceptional items in either the current or year-ago quarter, so reported and underlying growth rates are identical.
Q2 FY-2027 vs prior quarters
The profit surge was margin-led as much as volume-led: EBITDA margin (on revenue from operations) expanded to 19.98% from 15.65% a year ago, a roughly 430bps gain, while net margin (on total income) rose to 14.45% from 10.46%, a roughly 400bps gain — pointing to operating leverage and a better cost mix as revenue scaled. Sequentially, EBITDA margin eased from Q1 FY27's 21.93% while NPM held roughly flat versus Q1's 14.96%, so some of Q1's margin strength did not fully carry into Q2, though both quarters sit well above the year-ago base. Standalone PAT, which forms the bulk of the consolidated number, grew 106.7% YoY to ₹11.43 Cr on 62.5% revenue growth, confirming the parent entity drove most of the group's improvement.
The stock went into the print at ₹279.95, down 3.6% over the past month of trading.
For context: this is the highest quarterly PAT in the last 6 quarters on our records; PAT has now risen for 4 consecutive quarters; revenue is at a 6-quarter high.
Management provided a conservative revenue target of INR360 crores for FY27, with an expectation of exceeding this figure. They are targeting a 20%+ year-on-year growth rate, with potential to reach 25% driven by recent international expansion and domestic opportunities. The company anticipates sustained EBITDA margins
— This quarter: beat
No formal analyst consensus or brokerage preview for this stock turned up in a web search, so the print cannot be benchmarked against street expectations (vsStreet: unknown) — coverage appears limited for this small-cap auto-component name. Against management's own July 2026 guidance — a conservative ₹360 Cr FY27 revenue target, 20-25% YoY growth, and 20-21% consolidated EBITDA margin — the quarter beats comfortably: H1 FY27 consolidated revenue of ₹189.26 Cr is up 45.9% YoY and already implies an annualised run-rate near ₹378 Cr, ahead of the full-year target with two quarters still to go, while Q2's own 57.3% YoY growth exceeds the guided range. EBITDA margin landed just under the 20-21% guided band this quarter (19.98%) after beating it in Q1 (21.93%), so margins are tracking guidance rather than exceeding it. The only context-flagged corporate action this quarter was the promoter group trimming a 1.77% stake in mid-August 2026; no press release accompanying this result was available to cross-check management's own framing of the print.
W1
Whether consolidated EBITDA margin returns above the 20-21% guided band after easing from 21.93% (Q1 FY27) to 19.98% (Q2 FY27)
W2
FY27 revenue trending toward a ~₹378 Cr annualised run-rate vs management's ₹360 Cr conservative target — confirm against the full-year close
W3
Whether 20%+ YoY growth (with upside to 25% flagged from international expansion) sustains into H2 FY27 per the July 2026 concall commentary
Export Boom Masks Cyclical Fears; Guidance Hedged Despite Q2 Beat
Menon Bearings delivered a strong Q2 (revenue +57.3% YoY, PAT +117% YoY) but management maintained its FY27 guidance rather than raising it. The call reveals why: cyclical auto risks, commodity inflation pass-through lags, and Europe expansion still 12+ months away.
₹98.3 Cr
+57.3% YoY
₹14.7 Cr
+117.1% YoY
20.0%
flat YoY
₹350–370 Cr
hedged range, not raised
The quarter delivered organic growth that should have prompted a guidance raise — instead, management reset its FY27 range from ₹360 Cr to ₹350–370 Cr, a subtle hedging move. That gap is the story of Q2. Export surged >75% YoY and domestic OEM recovered +50%, validating management's diversification narrative. But the operating margin held flat at 20% despite productivity gains offsetting inflation, and gross margin compressed 7 ppt YoY. Management is positioning for cyclical auto downturn risk and commodity inflation that may not abate soon.
What the quarter really was
This was a beat-and-hold quarter. Export growth >75% was the headline driver — new customers (Honeywell in the US, John Deere for non-tractor applications) and ongoing momentum in established markets offset any auto slowdown signal. Domestic OEM segment grew ~50%, driven by non-tractor applications (generators, air compressors, braking systems), pushing tractor-bearing exposure down from 54% to 34% of auto revenue. Volume grew ~25% organically; that growth was real. But raw-material inflation (tin +72%, copper +50%, steel +12% in the quarter alone) absorbed much of that operating leverage. Management's stated productivity gains and yield optimization held the line at OPM 20%, but claimed margin sustainability at 23% looks aspirational at best, dependent on pricing power that they themselves acknowledged lags commodities by one quarter.
Claims vs. what holds up
Revenue growth 58.60% YoY consolidated
Delivered 57.3% YoY
Supported (within 130 bps)
PAT growth 117% YoY
Delivered 117.1% YoY
Supported exactly
More than 30% growth for FY27 expected
H1 implied ~47% YoY operating income growth
Supported (trajectory on track)
EBITDA margins 20%+ with targeting 23%
OPM delivered 20.0%; range 20–22% going forward
Supported, but 23% is aspirational not locked
Headcount growing slower than 30% revenue growth due to automation
H1 headcount ~5% growth vs. 30%+ revenue; 16 bearing lines × 3-person reduction planned
Supported (capex roadmap credible)
What changed on this call
Europe expansion materialized: ₹35 Cr RFQ pipeline confirmed post-management tour (prior call was 'potential')
Automation capex locked: ₹9 Cr committed (₹5 Cr Alkop, ₹4 Cr Bearings), 12–15 month deployment, 2.5–3yr ROI
Export growth re-guided higher: >75% delivered this quarter vs. prior 25% growth 'potential'
Domestic OEM +50% new growth driver: non-tractor diversification (generators, AC, braking) actively offsetting tractor cyclicality
Guidance range hedged: ₹360 Cr → ₹350–370 Cr (no numeric raise despite strong Q2)
Bull case vs. bear case
Revenue growth 57.3% YoY with PAT growing 117% — operating leverage is real
Export surge >75%; new customers (Honeywell, John Deere, Concentric) de-risk concentration
Domestic OEM +50%; tractor exposure down from 54% to 34% — cyclicality hedge credible
Capex roadmap locked (₹9 Cr automation, 2.5–3yr ROI); productivity gains (25% volume growth with flat headcount)
Margin resilience: OPM held 20% despite 7 ppt gross compression — productivity offsetting commodity inflation
Guidance hedged not raised — signals management caution on sustaining 30%+ growth
Gross margin down 7 ppt YoY; pricing lag risk (1-quarter lag to pass commodity inflation)
Raw-material inflation (tin +72%, copper +50%, steel +12%) — pass-through not assured if demand falters
Europe RFQ pipeline (₹35 Cr) is 9–12 months to first revenue; no near-term accretion
Cyclical auto remains: tractor exposure still 34% of revenue; farm-income sensitivity unresolved
Risks, ranked by severity to a holder
Cyclical auto downturn; tractor exposure 34% of revenue
Medium-HighManagement hedged guidance despite Q2 beat, signaling caution. If farm income falters (monsoon failure, tractor sales decline), revenue growth could slow materially. Non-tractor diversification is real but unproven at scale under downturn.
Raw-material inflation pass-through and pricing lag
MediumTin +72%, copper +50%, steel +12% this quarter. Gross margin down 7 ppt YoY despite 25% productivity gains. 1-quarter pricing lag acknowledged. If commodity prices stay elevated or demand softens, margin recovery stalls and 23% target is missed.
Export concentration (35% of revenue); geopolitical tail risk
Medium>75% export growth concentration in USA and Europe (not yet revenue). US tariff uncertainty post-Trump comments noted by management. New geographies add execution risk; freight volatility affects export margins.
Europe expansion execution (₹35 Cr RFQ pipeline, 9–12 month lag)
MediumZero revenue contribution yet; first revenues FY28–29. Quality/delivery/regulatory standards unfamiliar. If RFQ-to-revenue conversion slips, multi-year growth targets become harder to sustain.
Automation capex ROI (₹9 Cr, 2.5–3yr payback)
Low-MediumExpected ~50-person headcount reduction if deployed on schedule. If demand accelerates >30%, capex ROI timeline stretches. If demand falters, ROI becomes negative.
How the street is reading this
Stock trades at ₹308.65, up 205.59% off its 52-week low (₹101) but down 7.16% from its all-time high (₹332.45). Trading above its 20-day (₹279.38), 50-day (₹288.87), and 200-day (₹184.39) simple moving averages. RSI sits at 59.8 — neutral, not overbought. Volume trend is increasing, signaling active institutional and retail interest. The market's own verdict on the Q2 print is cautiously positive: the stock held firm near its highs and momentum is intact, but the 7% drawdown from ATH suggests the market is pricing in execution risk on the 30%+ multi-year growth guidance.
Institutional flows are mixed. FII ownership fell 7 bps (0.14% in Q1 FY27 from 0.21% in Q4 FY26) — light selling by foreign investors. DII ownership rose 37 bps (0.40% vs. 0.03% in prior quarter) — domestic funds dipping in. Promoter stake locked at 68.44%; no promoter-linked selling. The pattern reads as large-cap domestic funds seeing value on the dip from ATH, while foreigners trim exposure — consistent with hedging on execution risk.
The debate
What to watch next
1 · Q3 and Q4 seasonality (industry norms = stronger quarters)
Management claimed 'Q3–4 seasonally stronger' per industry practice. If Q3 delivers 20%+ growth and confirms the 30%+ FY27 pathway, guidance confidence rises. If Q3 flattens vs. Q2, that is a red flag on cyclicality.
2 · Europe RFQ-to-revenue conversion (9–12 month cycle starts now)
₹35 Cr RFQ pipeline post-management tour. First revenues likely FY28–29. Track: are samples approved? Are RFQs converting to POs? Any slips in timeline tighten medium-term growth path.
3 · Automation capex progress and headcount impact on margins
₹9 Cr committed, 12–15 month deployment. Expected ~50-person reduction in Bearings segment. If deployed on time and productivity gains hold, OPM has room to expand toward 22–23%. If capex stalls, margin uplift stalls too.
4 · Raw-material inflation trends and pricing power
Watch tin, copper, steel prices. If elevated, 1-quarter pricing lag means OPM pressure continues into Q3. If they ease, margin relief follows. This is the main lever on whether 23% EBITDA target is achievable.
The one number to track from here
Organic OPM — whether it stays 20% or moves toward 22–23%. That is the crux. If management can grow 30%+ (credible given export and domestic OEM momentum) while expanding margins to 22–23% (via capex and pricing power), the stock re-rates higher and the ₹500 Cr FY29 aspiration becomes achievable. If OPM stalls or compresses (due to commodity or cyclical headwinds), multi-year growth compounds at 20–25%, not 30%+, and the stock re-rates lower. Q3–Q4 delivery and the automation capex rollout will be the real tests.
Menon Bearings delivered an organic beat on Q2 (revenue 57%, PAT 117%), but management's decision to maintain guidance rather than raise it signals realism about cyclical auto, commodity inflation, and Europe execution risk. The quarter validates the export and domestic diversification story, but the next 12–24 months will test whether 30%+ growth and 23% EBITDA margins are achievable or merely aspirational. For holders: this is a 'hold' — good franchise, good quarter, but manage expectations for a potentially weaker H2 and cyclical headwinds. For new buyers: wait for Q3 to confirm seasonality and management confidence on FY27 before committing fresh capital. The number to follow: organic OPM — if it expands to 22%+, the long-term thesis holds; if it stalls, re-rate lower.
Strong delivery on growth & margins, execution risk on multi-year targets
The verdict, the claims that held up, the sharpest analyst exchanges, and the risks — the earnings call, decoded from the transcript.
Hold
confidence 7/10
Grade B
Hit Q2 delivery vs. typical seasonal expectations; maintained FY27 guidance (₹360→350–370 Cr, no explicit beat yet); track record of meeting monthly targets claimed but not independently verified.
Optimistic
next 1–2 quarters
Very Optimistic
multi-year
Strong execution—beat on both revenue (57.3% YoY) and PAT (117%)—driven by export surge and domestic OEM recovery, margins held at 20% OPM despite raw-material headwinds. Multi-year roadmap credible (Europe, automation CapEx, new customers), but execution risk on sustaining 30%+ growth in cyclical auto; management hedging on FY27 target suggests caution.
₹98.3 Cr
Revenue · +57.3% YoY₹14.7 Cr
Reported PAT · +117.1% YoYExpanding
Margins · vs guidance: CorroboratedDid the claims hold up?
Q2 revenue growth 58.60% YoY consolidated
METDelivered 57.3% YoY (within 130 bps)
PAT growth 117% YoY, EBITDA 103.8%
METDelivered PAT 117.1% YoY; EBITDA growth claim not separately verified but NPM 14.4% vs OPM 20% consistent with stated margin expansion
More than 30% growth for FY27 expected
METH1 implied ~47% YoY on 'income from operation'; Q2 alone 57.3% supports 30%+ for full year
EBITDA margins 20%+ with targeting 23%
METOPM delivered 20.0%; consistent with guidance, but 23% target is aspirational, not locked
Headcount growing slower than 30% revenue growth due to automation
METStated INR 190 Cr H1 vs INR 300 Cr last full year (~5% growth vs 30%+ revenue); specific plan mentioned (16 production lines × 3-person reduction = ~50-person cut in Bearings alone)
Earnings quality
What changed since the last call
Guidance range reset (slightly hedged)
NeutralFY27: ₹360 Cr → ₹350–370 Cr (initial guidance maintained/slightly cut; now say could exceed). No numeric change to margin or growth targets. Maintained 20%+ EBITDA; new aspiration 23% but not locked.
Europe expansion materialized
UpgradePrior call: 'potential ₹35 Cr Europe'; this call: ₹35 Cr RFQ pipeline confirmed post-tour; 9–12 month conversion cycle; first revenue FY28–29.
Automation capex accelerated
UpgradePrior call: vague 'future plans'; this call: ₹9 Cr committed (₹5 Cr Alkop, ₹4 Cr Bearings), 2.5–3yr ROI, 12–15 month deployment. Production lines 16 (Bearings); 4–person to 1-person per line target.
Export growth re-guided higher
UpgradePrior call: '25% growth potential'; this call: >75% export growth delivered; further growth expected from multiple geographies (US, Europe, China Plus One).
Domestic OEM growth new narrative
NewDomestic OEM +50% this quarter; non-tractor segments (generators, AC, compressors, braking systems) diversifying engine-bearing dependency from 54% → 34%.
The Q&A
Analysts pressed on margin compression (gross down 7 ppt YoY), sustainability of 23% target, and capex ROI. Management answered with specific operational metrics (volume +25%, productivity improvements, raw-material yield optimization) and hedged on margin using 'touch wood' and '20–22% range going forward.' Light pushback on Europe timing and cyclical exposure; management acknowledged but cited new customer wins offsetting tractor downturn.
Commodity-price impact — Arnav Sakhuja, Emkay
AnsweredYes, Alkop benefits from lower input costs. Vendors' pricing also down; pass-through mechanism active; additional profit anticipated.
Sales-expense inflation — Arnav Sakhuja, Emkay
AnsweredExport freight costs risen substantially; distribution for exports and USA market new; sales costs scaled with geographic expansion.
Gross margin compression — Bhargav Buddhadev, ICICI Securities
AnsweredRaw-material prices high but improved processes (25% volume growth, productivity gains) absorbed overheads; sustainability confirmed via automation and pricing mechanism.
Employee-headcount automation — Bhargav Buddhadev, ICICI Securities
AnsweredAutomation investments ₹5–4 Cr (Alkop/Bearings); 12-person reduction per 3-line setup; ROI 2.5–3 years; proactive de-risking for future manpower scarcity.
Alkop EV segment — Vignesh Iyer, ICICI Direct
AnsweredYes; EV absolute value increasing but percentage stable as domestic and export also grow. 54 new parts developed; SOB begun; new high-value products added to portfolio.
EV-segment customer detail — Vignesh Iyer, ICICI Direct
AnsweredConcentric (tier-2 EV), Tata (Punch, Curv, Jupiter—Alkop supplier), Taco Prestolite, Eaton Transmission, Poland (tier-2, Eaton). John Deere (house automation, non-tractor).
Growth drivers and macro — Garvit, CA
AnsweredEurope not yet contributing; 9–12 month RFQ-to-revenue cycle. Diversification underway; new customers actively pursued. China Plus One and US tariffs viewed as tailwinds for India sourcing.
Five-year revenue aspiration — Bipin Bohr, Nuvama Equity
PartialINR 500 Cr likely by FY29 (from INR 300 Cr prior target); CapEx deployed; 30%+ growth for next 4 years not guaranteed but likely if geographic and product diversification holds. Margins 20–22% base, 23% target.
Segment-margin detail — Athul Joby, ICICI Securities
AnsweredBrakes 30–35%, Alkop 18–19%, Bearing 23%. Q1–Q2 first-half lower; Q3–4 stronger per industry seasonality. Highest profit and PAT margins in company history this quarter.
Cyclicality and tractor exposure — Ashish Parikh, Q&A box
AnsweredTractor engine-bearing exposure down from 54% to 34%; new applications (generators, AC, braking, heavy-earth-moving) growing. Diversification ongoing. Tractor orders actually increasing despite drought in Maharashtra.
Geopolitical and trade tailwinds — Anil Parekh, Q&A box
AnsweredChina Plus One policy driving European interest in Indian suppliers; RFQs accelerating post-management visit. India industrial base strength recognized; long-term tailwind; Europe more stable than US politically.
Auto vs. non-auto mix — Gulam Soni, Q&A box
AnsweredAuto 60–65% of revenue; non-auto (engineering, oil & gas, EV, non-engine applications) growing but percentage ratio to remain similar as both scale. De-risking via diversification, not exit from auto.
Shipping policy and demand — Kunal Tokas
AnsweredCustomer-specific terms: DDP, FOB, EX-works vary. US customers want 3-month stock; inventory built pre-planned; now normalizing. Working-capital benefit recognized but not sustainable at high growth.
Growth composition — Kunal Tokas
Answered~20% from volume growth; ~10% from pricing (raw-material pass-through, new customer mix). Not inflation but genuine demand and capacity utilization gains.
Guidance
FY27 full-year INR 350–370 Cr (maintained)
MediumPrior: ₹360 Cr 'conservative' with expectation to exceed. Current: hedged range; said would 'bypass' positively. Q3–4 seasonally stronger per industry norms.
FY27–28 growth 30%+ plus new business INR 131 Cr
HighExport momentum, new OEM customer wins, domestic replacement-market recovery, Europe RFQ pipeline (9–12 month lag). Volume-driven.
FY28–29 growth 30%+ plus INR 157 Cr new business
MediumContingent on Europe conversion, continued geopolitical tailwind (China Plus One), new-product traction. Automation ROI realized.
INR 500 Cr revenue aspiration by FY29
MediumImplied from 'INR 500 Cr next year, likely next year or year after that.' Current run-rate ₹98 Cr/qtr suggests ₹390 Cr annualized; 30%+ CAGR reaches ₹520+ by FY29.
EBITDA margins 20%+ baseline; targeting 23% (next year)
MediumOPM delivered 20.0% this quarter. Margin range 20–22% going forward per volatility in raw materials. 23% target conditional on automation benefits and pricing power hold.
Segment margins: Brakes 30–35%, Alkop 18–19%, Bearings 23%
HighSpecific numbers provided. Brakes highest-margin; Alkop growing but lower margin due to product-mix evolution and tier-2 position.
Automation/machinery CapEx ₹9 Cr (₹5 Cr Alkop, ₹4 Cr Bearings)
High12–15 month deployment. ROI 2.5–3 years. Headcount reduction ~50 in Bearings; 3–person per line down to 1. New AI visual inspection, robotic cells.
Risks the call surfaced
Cyclical auto exposure
MediumAutomotive (engine bearings, brakes) 60–65% of revenue; tractor bearings historically cyclical. Recent Maharashtra drought cited by management; hedged via non-auto diversification (34% of auto revenue now non-tractor apps).
Raw-material inflation
MediumTin +72%, copper +50%, steel +12% this quarter. Management has 'pre-decided formula' for pass-through but 1-quarter lag acknowledged. Gross margin down 7 ppt YoY despite claimed pricing power.
Export concentration
Medium35% of revenue is export (USA, Europe, emerging). USA tariff uncertainty post-Trump comments cited. >75% export growth concentration in new geographies (USA, Europe) adds execution risk.
Europe expansion execution
MediumManagement tour post-H1 yield RFQ pipeline ₹35 Cr, but conversion to revenue 9–12 months out (FY28–29). First-time entry into European supply chain; quality, delivery, regulatory standards unfamiliar.
Automation CapEx ROI
Low₹9 Cr capex over 12–15 months for automation and AI visual inspection. Expected ~50-person reduction in Bearings via 16-line semi-automation. If demand growth accelerates >30%, capex ROI and payback timeline may stretch.
Working-capital elasticity at high growth
LowH1 OCF ~₹20 Cr (flat vs. ₹23 Cr last year) despite 47% operating-income growth. Inventory cycle normalizing after US warehouse stock build; but if 30%+ growth sustained, WC may become binding.
Management
Score 7/10. Detailed and specific; directly addressed concerns on margins, cyclicality, working capital, and expansion plans. Avoided corporate jargon; acknowledged uncertainties ('touch wood', range-based guidance). Some hedging on multi-year targets. Strong Q2 track record (57.3% revenue, 117% PAT vs. claims); monthly targets claimed beaten consistently. FY27 guidance maintained (not upgraded). CapEx specificity (₹9 Cr, 12–15 month timeline, ROI 2.5–3yr) high; automation progress real (visual inspection, robotic cells piloted).
1 · Q3 & Q4 FY27
Seasonal strength (industry highs); tractor demand post-monsoon
2 · H2 FY28
Europe RFQ conversion (₹35 Cr pipeline); first revenue assumed 9–12 months post-RFQ
3 · 12–15 months ahead
Automation capex completion; productivity gains and manpower reduction
Multi-year roadmap credible (Europe, automation CapEx, new customers), but execution risk on sustaining 30%+ growth in cyclical auto; management hedging on FY27 target suggests caution.